TECHNICAL DATA SHEET & PROCESS GUIDE

A specially formulated blend of solvents for fast and effective blending of clearcoats. Produce seamless transitions on blend panels of clearcoats and solid colors for a virtually invisible repair. Ultra fine, soft spray generates immediate results. Ideal for both single and multi-panel repairs.

• Invisible blend finish
• For use with all coatings
• Suitable for SMART repairs
• Convenient aerosol application means no waste, less mess, no clean-up and no gun required
• Reduces polishing time

MIXING

• Shake the aerosol can for at least 2 minutes before use

APPLICATION

• Sand blend area with sanding soap or P800 - 1200 grit sandpaper to prepare blend area.
• Holding the aerosol approximately 10" from the panel, apply a light mist coat over the bled area of the freshly applied clearcoat or topcoat.
• Apply 2-3 light coats of BLEND#9 immediately after clearcoat is applied to blend edge.
• Follow the clearcoat or topcoat manufacturers instructions for flash off and drying.

SHELF LIFE

• 2 years subject to proper storage conditions
• Aerosol cans should be stored for two hours at room temperature before use. For long term storage, keep in a dry well ventilated area and away from direct sunlight and frost. To clear the nozzle and maximize the lifespan of your aerosol, always invert the can and spray upside down for a few seconds after each use. Should the nozzle become blocked, remove it from the can and soak it in gentle thinners.
• Recommended Storage Temperature 41°F - 77°F
• Recommended Application Temperature 68°F