TECHNICAL DATA SHEET & PROCESS GUIDE

Dry powder guide coat used to highlight and identify surface imperfections when sanding fillers, primers or uneven surfaces

• Does not clog or block abrasives
• Suitable for dry or wet sanding
• Dries instantly
• Convenient aerosol application mean no waste, less mess, and no clean-up

APPLICATION GUIDE

MIXING

• Share aerosol can for at least 2 minutes before use.

APPLICATION

• Spray directly onto the cured body filler or primer.
• Allow to dry for a few seconds.
• Sand to required finish. Remaining low spots will show as black.

SHELF LIFE

• 2 years subject to proper storage conditions
• Aerosol cans should be stored for two hours at room temperature before use. For long term storage, keep in a dry well ventilated area and away from direct sunlight and frost. To clear the nozzle and maximize the lifespan of your aerosol, always invert the can and spray upside down for a few seconds after each use. Should the nozzle become blocked, remove it from the can and soak it in gentle thinners.
• Recommended Storage Temperature 41°F - 77°F
• Recommended Application Temperature 68°F