Brand

UPOL D™ FINE METALLIC POLYESTER FILLER

SKU: UP0709

Brand: UPOL

$26.43

Qty

U-POL Australia & New Zealand Ltd | LinkedIn

Description Direction of Use Specification

UPOL D FINE METALLIC POLYESTER FILLER 1.1qt SILVER, UP0709, (Each/1pc)

DETAILS

U-POL D™ is an aluminum reinforced, heat resistant filler containing aluminum flakes.

FEATURES

Versatile, high adhesion across a multitude of substrates
Smooth spreading with excellent filling properties and easy sanding
Waterproof - bond or fill with the same product

Substrates: SMC, fiberglass, steel, aluminum, rigid plastics, OEM paint, wood

TECHNICAL DATA SHEET & PROCESS GUIDE

U-POL D™ is an aluminum reinforced, heat resistant filler containing aluminum flakes.

Versatile, high adhesion across a multitude of substrates.
Smooth spreading with excellent filling properties and easy sanding.
Water resistant - bond or fill with the same product.

TYPICAL USE: Ideal for deep to medium depth panel damage

TECHNICAL DATA & APPLICATION GUIDE

SUBSTRATES

Bare Steel
Aluminum
Galvanized
Original Paint
Fiberglass

TOOLS REQUIRED

Onion Board Mixing Palette (UP0737)
Bodyfiller Applicator (UP0738)
U-POL System 20 Degreaser (UP2002, UP2012, UP2022)
MAXIMUM Abrasives, MAXIMUM Premium Masks, MAXIMUM Painters Overalls
GUIDE #7 Guide Coat Aerosol.

SUBSTRATE PREPERATION

For best results, ensure the surface is thoroughly cleaned, degreased, dried and dust free.

	50°F	70°F	85°F
MIX RATIO (BPO HARDENERD)	3%	2%	1%
GEL TIME	7-8 Minutes	4-6 Minutes	4-5 Minutes
SANDABLE AFTER	20 Minutes	15-20 Minutes	15 Minutes

MAXIMUM FILM DEPTH: 3 -5 mm

Mix thoroughly on an Onion Board Mixing Palette. Follow mix ratio carefully. Do not under or over catalyze. Apply with a pressing action to reduce air entrapment. Not recommended for applications below 40°F

INITIAL SANDING	P80 – P120
FINAL SANDING	P180 – P240

U-POL recommends using GUIDE #7 Guide Coat Aerosol during the sanding process to identify the high and low spots. A U-POL Finishing Filler such as DOLPHIN GLAZE can be used to fill imperfections such as pin holes and scratches prior to painting.

VOC INFORMATION

As Packaged Regulatory VOC	227 g/l (1.89 lb/gal)
As Packaged Actual VOC	227 g/l (1.89 lb/gal)
As Applied Regulatory VOC	48 g/l (0.4 lb/gal)
As Applied Actual VOC	48 g/l (0.4 lb/gal)
Percent Solids	85.05 wt%
Volatiles	15.0 wt%
Water Content	0 wt%
Exempt Compounds by weight	0 wt%
Exempt Compounds by volume	0 vol %
% HAPS	13.63 wt%

IMPORTANT: FOR PROFESSIONAL USE ONLY.

Read full instructions before use.
This product contains hazardous materials and therefore appropriate personal protective equipment should always be used. Please refer to
the label and consult the safety data sheet for full handling instructions and personal protection information. U-POL disclaims any liability
where the user does not wear the recommended personal protective equipment. The above data is for information only and may change
without prior notice. It is the Buyers responsibility to ensure the suitability of the products for their own use and check the information is up to
date. The recommendation of use of our products and application in our technical data sheets are based on our knowledge and experience.
These data sheets are available via your local stockist or via the U-POL website at WWW.U-POL.COM. U-POL is not responsible for the
results obtained by others over whose methods we have no control and thereof U-POL is not liable for consequential or incidental damages
including loss of profits.

SDS - UPOL - UP0709 TDS - UPOL - UP0709