NORTON® SPEED-GRIP™ TWO-PART URETHANE 1:1, 220ml, BLACK, 15 MINUTE, 04617, (Each/1pc)

DETAILS

Two-part urethane (1:1) adhesive used for installation of hood panels, roof panels, fenders, fender liners, fairings, spoilers, wind deflectors, cab extenders, ground effects, headlamp buckets, and other body panels. For bonding fiberglass, SMC, carbon fiber, and other plastics to itself and to primed metal.

Work Time: 20 Minutes
Color: Black
Clamp Time: 45 Minutes
Sanding Time: 90 Minutes

* Sanding time depends on film thickness
* Times are @ 70°F/21°C

FEATURES

• One product for all structural and cosmetic repairs on bumpers
• Easy to sand
• Will not lift or roll up
• Clamp time 45 min and sanding time 90 min

NORTON® TECH TIP

Norton® SpeedGrip adhesives SHOULD NOT be used for bonding structural components
such as rails, pillars, rocker panels, core supports, etc. If in doubt as to what is a structural
component, contact the vehicle manufacturer.

RESISTANCE SPOT WELDING: Norton recommends resistance welding through Metal
Bonding Adhesives in a wet or cured state with little to no burn back.

WELDING: Norton Adhesive CANNOT be in the weld area or burn back will occur. Norton
recommends at least one inch clearance from the weld site. A one inch clearance will keep
the adhesive from contaminating the weld site while positioning the panel on the vehicle. If
using weld through primer, make sure to cover weld area on vehicle and replacement
panel, but do not contaminate bond line areas.

After clamping, wipe any excess adhesive off the panel while wet.