NORTON® SPEED-GRIP™ METAL PANEL & WELD BONDING ADHESIVE, 2:1, 220ml, GREEN, 45 MINUTE, 06419, (Each/1pc)

DETAILS

Two-part acrylic (2:1) for panel bonding of door panels, other body sheet metal, steel and aluminum.
Clamp time: 1-1/2 hours. Cure time: 8 hours

Work Time: 45 Minutes
Color: Green
Clamp Time: 1.5 Hours
Cure Time: 8 Hours

FEATURES

• Bonds door panels to door frames without welding
• Guaranteed corrosion protection

NORTON® TECH TIP

Norton® SpeedGrip adhesives SHOULD NOT be used for bonding structural components
such as rails, pillars, rocker panels, core supports, etc. If in doubt as to what is a structural
component, contact the vehicle manufacturer.

RESISTANCE SPOT WELDING: Norton recommends resistance welding through Metal
Bonding Adhesives in a wet or cured state with little to no burn back.

WELDING: Norton Adhesive CANNOT be in the weld area or burn back will occur. Norton
recommends at least one inch clearance from the weld site. A one inch clearance will keep
the adhesive from contaminating the weld site while positioning the panel on the vehicle. If
using weld through primer, make sure to cover weld area on vehicle and replacement
panel, but do not contaminate bond line areas.

After clamping, wipe any excess adhesive off the panel while wet.