NORTON® SPEED-GRIP™ REPAIR & FILLER, TWO-PART EPOXY 1:1, 220ml, PURPLE, 5 MINUTE, 04612, (Each/1pc)

DETAILS

Two-part epoxy (1:1) used for cosmetic repairs on both flexible and rigid parts. Adhesion promoter must be used on plastic parts.

Work Time: 5 Minutes
Color: Purple
Sanding Time: 45 Minutes
Paint Time: 15-30 Minutes

* Sanding time depends on film thickness
* Times are @ 70°F/21°C

FEATURES

• Work time is 5 min and it can be sanded in 15 to 30 min
• It sands easily and feathers well

NORTON® TECH TIP

Norton® SpeedGrip adhesives SHOULD NOT be used for bonding structural components
such as rails, pillars, rocker panels, core supports, etc. If in doubt as to what is a structural
component, contact the vehicle manufacturer.

RESISTANCE SPOT WELDING: Norton recommends resistance welding through Metal
Bonding Adhesives in a wet or cured state with little to no burn back.

WELDING: Norton Adhesive CANNOT be in the weld area or burn back will occur. Norton
recommends at least one inch clearance from the weld site. A one inch clearance will keep
the adhesive from contaminating the weld site while positioning the panel on the vehicle. If
using weld through primer, make sure to cover weld area on vehicle and replacement
panel, but do not contaminate bond line areas.

After clamping, wipe any excess adhesive off the panel while wet.