NORTON® SPEED-GRIP™ SMC & FIBERGLASS REPAIR ADHESIVE, TWO-PART EPOXY 1:1, 220ml, BEIGE, 40 MINUTE, 06417, (Each/1pc)

DETAILS

Two-part epoxy (1:1) used for structural and cosmetic repair of all types of rigid body plastics such as SMC, GTX, fiberglass, Metton®, and carbon fiber.

Work Time: 40 Minutes
Color: Beige
Sanding Time: 10 min @180°F
Paint Time: 60 min @180°F

* Sanding time depends on film thickness

FEATURES

• One product for all rigid body panels
• Sands very easily
• Will not lift or roll up
• No read-through and zero shrinkage

NORTON® TECH TIP

Norton® SpeedGrip adhesives SHOULD NOT be used for bonding structural components
such as rails, pillars, rocker panels, core supports, etc. If in doubt as to what is a structural
component, contact the vehicle manufacturer.

RESISTANCE SPOT WELDING: Norton recommends resistance welding through Metal
Bonding Adhesives in a wet or cured state with little to no burn back.

WELDING: Norton Adhesive CANNOT be in the weld area or burn back will occur. Norton
recommends at least one inch clearance from the weld site. A one inch clearance will keep
the adhesive from contaminating the weld site while positioning the panel on the vehicle. If
using weld through primer, make sure to cover weld area on vehicle and replacement
panel, but do not contaminate bond line areas.

After clamping, wipe any excess adhesive off the panel while wet.