NORTON® SPEED-GRIP™ PANEL BONDING ADHESIVE, TWO-PART EPOXY 2:1, 220ml, BLACK, 90 MINUTE, 06421, (Each/1pc)

DETAILS

Superior two-part epoxy (2:1) adhesive designed to bond SMC, FRP, fiberglass, steel, and aluminum auto parts and body panels to each other and to metal frames (no primer required). It seals and bonds in one application.

Work Time: 90 Minutes
Color: Black
Clamp Time: 4 Hours
Sanding Time: 8 Hours

* Sanding time depends on film thickness
* Times are @ 70°F/21°C

FEATURES

• Minimal odor
• Glass beads for proper spacing
• Easy to sand formulation
• Paintable
• Seals and bonds in one step

NORTON® TECH TIP

Norton® SpeedGrip adhesives SHOULD NOT be used for bonding structural components
such as rails, pillars, rocker panels, core supports, etc. If in doubt as to what is a structural
component, contact the vehicle manufacturer.

RESISTANCE SPOT WELDING: Norton recommends resistance welding through Metal
Bonding Adhesives in a wet or cured state with little to no burn back.

WELDING: Norton Adhesive CANNOT be in the weld area or burn back will occur. Norton
recommends at least one inch clearance from the weld site. A one inch clearance will keep
the adhesive from contaminating the weld site while positioning the panel on the vehicle. If
using weld through primer, make sure to cover weld area on vehicle and replacement
panel, but do not contaminate bond line areas.

After clamping, wipe any excess adhesive off the panel while wet.